1. By 10 months after the entry into force of this Regulation all TSOs shall jointly develop a proposal for a single methodology for the delivery of the generation and load data required to establish the common grid model, which shall be subject to consultation in accordance with Article 12. The proposal shall include a justification based on the objectives of this Regulation for requiring the information.
2. The proposal for the generation and load data provision methodology shall specify which generation units and loads are required to provide information to their respective TSOs for the purposes of capacity calculation.
3. The proposal for a generation and load data provision methodology shall specify the information to be provided by generation units and loads to TSOs. The information shall at least include the following:
(a)
information related to their technical characteristics;
(b)
information related to the availability of generation units and loads;
(c)
information related to the schedules of generation units;
(d)
relevant available information relating to how generation units will be dispatched.
4. The methodology shall specify the deadlines applicable to generation units and loads for providing the information referred to in paragraph 3.
5. Each TSO shall use and share with other TSOs the information referred to in paragraph 3. The information referred to in paragraph 3(d) shall be used for capacity calculation purposes only.
6. No later than two months after the approval of the generation and load data provision methodology by all regulatory authorities, ENTSO for Electricity shall publish:
(a)
a list of the entities required to provide information to the TSOs;
(b)
a list of the information referred to in paragraph 3 to be provided;
(c)
deadlines for providing information.