1. Measurement equipment shall be installed and techniques used in order to monitor the parameters, conditions and mass concentrations relevant to the incineration or co-incineration process.
2. The measurement requirements shall be laid down in the permit or in the conditions attached to the permit issued by the competent authority.
3. The appropriate installation and the functioning of the automated monitoring equipment for emissions into air and water shall be subject to control and to an annual surveillance test. Calibration has to be done by means of parallel measurements with the reference methods at least every three years.
4. The location of the sampling or measurement points shall be laid down by the competent authority.
5. Periodic measurements of the emissions into the air and water shall be carried out in accordance with Annex III, points 1 and 2.